高性能全千兆路由交换机
产品描述
S5860-E系列高性能全千兆路由交换机是安徽皖通针对企业用户推出的三层全千兆路由盒式交换机。该产品基于SDN 架构，支持VxLAN、NETCONF/YANG 、纵向虚拟化等技术，提供高密度千兆接入和万兆上行接口，具备丰富的二层交换和三层能力，可广泛应用于园区网络汇聚和接入层，为金融、交通、能源、政务、商业等各行业用户提供高效、安全的网络解决方案。
各型号详见技术规格参数。
关键特性
- 多业务融合
- 强大的安全特性
- 增强的可靠性
- 虚拟集群技术VSE
- 智能POE
- 零部署，易维护
技术规格
| 型号 | 描述(插卡式交换机) | model | describe(Plug-in card switch) |
| S5860-60PM-E | 48*GE RJ45端口 + 4*10GE SFP+端口 1*扩展卡槽 支持POE |
S5860-60PM-E | 48*GE RJ45 ports + 4*10GE SFP+ ports 1*Expansion card slot Supports PoE |
| S5860-60QM-E | 48*GE POE+端口 + 4*10GE SFP+端口 1*扩展卡槽 支持POE |
S5860-60QM-E | 48*GE PoE+ ports + 4*10GE SFP+ ports 1*Expansion card slot Supports PoE |
| S5860-60FM-E | 48*GE SFP端口+4*10GE SFP+端口 1*扩展卡槽 |
S5860-60FM-E | 48*GE SFP ports + 4*10GE SFP+ ports 1*Expansion card slot |
| S5860-36QM-E | 24*GE RJ45端口+ 4*10GE SFP+端口 1*扩展卡槽 |
S5860-36QM-E | 24*GE RJ45 ports + 4*10GE SFP+ ports 1*Expansion card slot |
| S5860-36PM-E | 24*GE RJ45端口+ 4*10GE SFP+端口 1*扩展卡槽 支持POE |
S5860-36PM-E | 24*GE RJ45 ports + 4*10GE SFP+ ports 1*Expansion card slot Supports PoE |
| 型号 | 描述(固定盒体交换机) | model | describe(Fixed box switch) |
| S5860-28X-E | 24端口GE RJ45+4端口10GE SFP+ 内置1+1冗余电源 |
S5860-28X-E | 24-port GE RJ45 + 4-port 10GE SFP+ Built-in 1+1 redundant power supply |
| S5860-52X-E | 48端口GE RJ45+4端口10GE SFP+ 内置1+1冗余电源 |
S5860-52X-E | 48-port GE RJ45+, 4-port 10GE SFP+, built-in 1+1 redundant power supply. |
| S5860-28FX-E | 24端口GE SFP+4端口10GE SFP+ 内置1+1冗余电源 |
S5860-28FX-E | 24-port GE SFP+, 4-port 10GE SFP+, built-in 1+1 redundant power supply. |
| S5860-36QM-E | S5860-60QM-E | S5860-60FM-E | S5860-36PM-E | S5860-60PM-E | |
| 交换容量 | 2.56/25.6Tbps | 2.56/25.6Tbps | 2.56/25.6Tbps | 2.56/25.6Tbps | 2.56/25.6Tbps |
| 包转发率 | 756Mpps | 822Mpps | 822Mpps | 756Mpps | 822Mpps |
| 固定端口数 | 24端口GE RJ45 | 48端口GE RJ45 + | 48端口GE SFP+ | 24端口GE RJ45（PoE/PoE+） | 48端口GE RJ45（PoE/PoE+） |
| +4端口10GE SFP+ | 4端口10GE-SFP+ | 4端口10GE SFP+ | +4端口10GE SFP+ | +4端口10GE SFP+ | |
| 扩展卡槽位数 | 1 | 1 | 1 | 1 | 1 |
| 扩展卡类型 | 8端口10GE SFP+万兆光 | ||||
| 2端口40GE QSFP+光 | |||||
| 设备尺寸 | 44mm*442 mm* 440 mm | ||||
| （H*W*D） | |||||
| 最大重量 | 7.5kg | 7.6kg | 7.7kg | 7.8kg | 8.1kg |
| DC电源 | -57V~-38V | ||||
| AC电源 | 100V~242V，50~60Hz | ||||
| 高压直流电源 | 130VDC~380VDC | ||||
| 电源冗余 | 内置模块化可插拔双电源，支持交流、直流、交直流混插1+1冗余 | ||||
| PoE | 单电源PoE最大输出420W； | 单电源PoE最大输出420W； | |||
| 双电源PoE最大输720W; | 双电源PoE最大输960W; | ||||
| 单端口最大输出30W | 单端口最大输出30W | ||||
| 最大功耗 | 59.8W | 69w | 90.4w | 83w | 96w |
| 散热风道 | 左右进，后面出 | ||||
| 最大散热量 | 204.0376BTU/h | 235.428 BTU/h | 308.4448 BTU/h | 283.196 BTU/h | 327.552 BTU/h |
| 工作环境 | 工作温度：-10 ℃ ~ +50 ℃ 工作湿度：5% ~ 95% | ||||
| MTBF/MTTR | > 400000 小时 / < 30 分钟 | ||||
| MAC地址表 | 64K | ||||
| ARP表 | 17K | ||||
| IPv4路由表 | 48K | ||||
| IPv6路由表 | 16K | ||||
| L2功能 | 支持IEEE 802.1q VLAN，IEEE 802.1p，IEEE 802.3ad | ||||
| 支持STP，RSTP，MSTP | |||||
| 支持灵活QinQ，VLAN翻译，PVLAN | |||||
| 支持DHCP Snooping、DHCP Proxy、DHCP Server/CLient、DHCP Relay、DHCPv6 | |||||
| 支持GVRP | |||||
| 支持VxLAN、EVPN | |||||
| L3功能 | 支持IPv4/IPv6路由功能 | ||||
| 支持IPv4 静态路由、RIPv1/v2，OSPF， ISIS， BGP4、uRPF | |||||
| 支持IPv6 RIPng、OSPFv3、ISISv6、BGP4+ 、IPv6 VRF | |||||
| 支持IPv6地址 全球单播地址、 站点/链路本地地址、环回地址 | |||||
| 支持IPv6支撑 Ping6、Telnet6、TCPv6/UDPv6、DHCPv6 | |||||
| 支持ND NDP协议、SAVI功能、重定向功能 | |||||
| 支持IPv6隧道 IPv4/IPv6双栈、6to4中继 | |||||
| 支持策略路由 | |||||
| MPLS | 支持MCE | ||||
| 支持MPLS VPN | |||||
| IPV6 | 支持IPv6 Ping、IPv6 Telnet、ND（Neighbor Discovery）、MLD Snooping、DHCPv6 snooping | ||||
| 支持IPv6 ACL | |||||
| 支持IPv4/IPv6双栈 | |||||
| 支持6to4 tunnel、ISATAP tunnel | |||||
| 组播 | 支持IGMP V1/V2/V3 | ||||
| 支持IGMP侦听、过滤、代理和快速离开 | |||||
| 支持可控组播、CAC频道访问控制 | |||||
| 支持组播VLAN注册MVR | |||||
| 支持基于VLAN/Group加入用户数量的限制 | |||||
| 支持跨VLAN组播复制/组播VLAN | |||||
| 支持PIM-SM、PIM-DM协议 | |||||
| 支持二层组播IPv6，MLD Snooping、跨VLAN组播复制/组播VLAN IPv6 | |||||
| 支持MSDP协议 | |||||
| 支持三层组播路由IPv4/IPv6 | |||||
| QoS/ACL | 支持基于端口/流的带宽管理 | ||||
| 支持基于802.1p、IP DSCP等优先级标记、改写和映射 | |||||
| 支持COS，IP DSCP，MPLS EXP 之间的映射 | |||||
| 支持SP、WRR、SP+WRR的队列调度机制 | |||||
| 支持WRED、尾丢弃等拥塞避免机制 | |||||
| 支持基于二层ACL、扩展ACL（五元组）、混合ACL、自定义ACL、VLAN的ACL、双向ACL、ACL配置 | |||||
| 支持普通端口、CPU端口重定向、流镜像 | |||||
| 安全 | 支持用户分级管理和口令保护 | ||||
| 支持CPU防攻击、CPU过载保护、DOS攻击防护、ICMP防攻击、支持防ARP攻击 | |||||
| 支持端口安全功能(隔离/绑定) | |||||
| 支持LAND攻击保护、BLAT攻击保护、TCP攻击报文过滤 | |||||
| 支持控制平面安全 | |||||
| 支持动态ARP检测 | |||||
| 支持生成树根保护（Root Guard）、BPDU攻击保护 | |||||
| 支持IP Source Guard | |||||
| 支持uRPF单播逆向路由检查 | |||||
| 支持RIP/OSPF/BGP MD5密文检查 | |||||
| 接入认证 | 支持802.1X认证 EAP/PAP/CHAP | ||||
| 支持本地认证 PAP/CHAP+VLAN+PORT+ 、VLAN+PORT+ MAC绑定认证 | |||||
| 支持接入控制 基于MAC、基于PORT+MAC、基于VLAN+MAC、基于PORT + VLAN+MAC | |||||
| 支持Radius认证 PAP/EAP/CHAP、RFC 2865 RADIUS、Radius Client | |||||
| 支持TACACS+ 认证 | |||||
| 支持Portal认证 V1/V2/V3 PAP/CHAP加密 | |||||
| 可靠性 | 支持LACP、MC-LAG、ECMP等价路由 | ||||
| 支持ZESS，ERPS、ZESR/ZESR+ | |||||
| 支持VRRP、 VRRPE | |||||
| 支持单端口40GE捆绑、热插拔、PW FRR | |||||
| 支持BFD for static route, OSPF, RIP, IS-IS, BGP、LDP | |||||
| 支持IP FRR、GRfor静态路由、OSPF、RIP、ISIS、BGP | |||||
| 支持Y.1731、CFM、EFM | |||||
| 易维特性 | 支持GE、RSR232、USB、miniUSB多种接口，支持带内带外网管，支持远程、现场开通运维 | ||||
| 支持易维按键（M-BUTTON）功能 | |||||
| 支持零部署 | |||||
| 设备管理 | 支持WEB管理、SNMP管理、ZGMP | ||||
| 支持CLI，Telnet，SSH | |||||
| 支持本地和远程（Radius/Tacacs+）的用户登录认证和授权 | |||||
| 支持NETCONF/YANG | |||||
| 支持sFlow | |||||
| S5860-36QM-E | S5860-60QM-E | S5860-60FM-E | S5860-36PM-E | S5860-60PM-E | |
| Switching capacity | 2.56/25.6Tbps | 2.56/25.6Tbps | 2.56/25.6Tbps | 2.56/25.6Tbps | 2.56/25.6Tbps |
| Packet forwarding rate | 756Mpps | 822Mpps | 822Mpps | 756Mpps | 822Mpps |
| Fixed number of ports | 24-port GE RJ45 | 48-port GE RJ45+ | 48-port GE SFP+ | 24-port GE RJ45 (PoE/PoE+) | 48-port GE RJ45 (PoE/PoE+) |
| +4-port 10GE SFP+J5 | 4-port 10GE-SFP+ | 4-port 10GE SFP+ | +4-port 10GE SFP+M5 | +4-port 10GE SFP+H6 | |
| Expansion slot bit | 1 | 1 | 1 | 1 | 1 |
| Expansion card type | 8-port 10GE SFP+ 10 Gigabit optical fiber | ||||
| 2-port 40GE QSFP+ optical | |||||
| Equipment size | 44mm*442 mm* 440 mm | ||||
| （H*W*D） | |||||
| Maximum weight | 7.5kg | 7.6kg | 7.7kg | 7.8kg | 8.1kg |
| DC power supply | -57V~-38V | ||||
| AC power | 100V~242V，50~60Hz | ||||
| High voltage DC power supply | 130VDC~380VDC | ||||
| Power redundancy | Built-in modular pluggable dual power supply, supporting AC, DC, and AC/DC mixed plugging with 1+1 redundancy. | ||||
| PoE | Single-supply PoE maximum output: 420W; | Single-supply PoE maximum output 420W； | |||
| Dual-power PoE with a maximum output of 720W; | Dual-power PoE with a maximum output of 960W; | ||||
| Maximum output of 30W per port | Maximum output of 30W per port | ||||
| Maximum power consumption | 59.8W | 69w | 90.4w | 83w | 96w |
| Heat dissipation airflow | Enter from the left and right, exit from the back. | ||||
| Maximum heat dissipation | 204.0376BTU/h | 235.428 BTU/h | 308.4448 BTU/h | 283.196 BTU/h | 327.552 BTU/h |
| Work environment | Operating temperature: -10℃ ~ +50℃; Operating humidity: 5% ~ 95% | ||||
| MTBF/MTTR | > 400,000 hours / < 30 minutes | ||||
| MAC address table | 64K | ||||
| ARP table | 17K | ||||
| IPv4 routing table | 48K | ||||
| IPv6 routing table | 16K | ||||
| L2 function | Support IEEE 802.1q VLAN, IEEE 802.1p, IEEE 802.3ad | ||||
| Supports STP, RSTP, and MSTP | |||||
| Supports flexible QinQ, VLAN translation, and PVLAN. | |||||
| Supports DHCP Snooping、DHCP Proxy、DHCP Server/CLient、DHCP Relay、DHCPv6 | |||||
| Supports GVRP | |||||
| Supports VxLAN、EVPN | |||||
| L3 function | Supports IPv4/IPv6 routing functionality | ||||
| Supports IPv4 static routing, RIPv1/v2, OSPF, ISIS, BGP4, and uRPF. | |||||
| Supports IPv6 RIPng、OSPFv3、ISISv6、BGP4+ 、IPv6 VRF | |||||
| Supports IPv6 addresses, including global unicast addresses, site/link local addresses, and loopback addresses. | |||||
| Supports IPv6, including Ping6, Telnet6, TCPv6/UDPv6, and DHCPv6. | |||||
| Supports ND NDP protocol, SAVI function, and redirection function. | |||||
| Supports IPv6 tunneling, IPv4/IPv6 dual-stack, and 6to4 trunking. | |||||
| Supports policy-based routing | |||||
| MPLS | Supports MCE | ||||
| Supports MPLS VPN | |||||
| IPV6 | Supports IPv6 Ping、IPv6 Telnet、ND（Neighbor Discovery）、MLD Snooping、DHCPv6 snooping | ||||
| Supports IPv6 ACL | |||||
| Supports IPv4/IPv6 dual stack | |||||
| Supports 6to4 tunnel、ISATAP tunnel | |||||
| multicast | Supports IPv4/IPv6 dual stack IGMP V1/V2/V3 | ||||
| Supports IGMP snooping, filtering, proxying, and fast exit. | |||||
| Supports controllable multicast and CAC channel access control. | |||||
| Supports multicast VLAN registration MVR | |||||
| Supports limiting the number of users joining based on VLAN/Group | |||||
| Supports cross-VLAN multicast replication/multicast VLANs | |||||
| Supports PIM-SM and PIM-DM protocols | |||||
| Supports Layer 2 multicast IPv6, MLD Snooping, cross-VLAN multicast replication/multicast VLAN IPv6 | |||||
| Supports MSDP protocol | |||||
| Supports Layer 3 multicast routing for IPv4/IPv6 | |||||
| QoS/ACL | Supports port/stream-based bandwidth management | ||||
| Supports priority marking, rewriting, and mapping based on 802.1p, IP DSCP, etc. | |||||
| Supports mapping between COS, IP DSCP, and MPLS EXP. | |||||
| Supports queue scheduling mechanisms such as SP, WRR, and SP+WRR. | |||||
| Supports congestion avoidance mechanisms such as WRED and tail drop. | |||||
| Supports Layer 2 ACLs, extended ACLs (5-tuples), hybrid ACLs, custom ACLs, VLAN ACLs, bidirectional ACLs, and ACL configuration. | |||||
| Supports Layer 2 ACLs, extended ACLs (5-tuples), hybrid ACLs, custom ACLs, VLAN ACLs, bidirectional ACLs, and ACL configuration. | |||||
| Safety | Supports hierarchical user management and password protection | ||||
| Supports CPU attack prevention, CPU overload protection, DOS attack protection, ICMP attack prevention, and ARP attack prevention. | |||||
| Supports port security features (isolation/binding) | |||||
| Supports LAND attack protection, BLAT attack protection, and TCP attack packet filtering. | |||||
| Support control plane safety | |||||
| Supports dynamic ARP detection | |||||
| Supports root protection and BPDU attack protection. | |||||
| Supports IP Source Guard | |||||
| Supports uRPF unicast reverse route inspection | |||||
| Supports RIP/OSPF/BGP MD5 encryption checking | |||||
| Access Authentication | Supports 802.1X authentication (EAP/PAP/CHAP) | ||||
| Supports local authentication: PAP/CHAP+VLAN+PORT+ and VLAN+PORT+MAC binding authentication. | |||||
| Supports access control based on MAC, PORT+MAC, VLAN+MAC, and PORT + VLAN+MAC. | |||||
| Supports RADIUS authentication (PAP/EAP/CHAP, RFC 2865 RADIUS, RADIUS Client). | |||||
| Supports TACACS+ certification | |||||
| Supports Portal authentication; V1/V2/V3 PAP/CHAP encryption. | |||||
| reliability | Supports LACP, MC-LAG, and ECMP equal-cost routing | ||||
| Supports ZESS, ERPS, ZESR/ZESR+ | |||||
| Supports VRRP and VRRPE | |||||
| Supports single-port 40GE bonding, hot-swapping, and PW FRR. | |||||
| Supports BFD for static route, OSPF, RIP, IS-IS, BGP、LDP | |||||
| Supports IP FRR, GR for static routes, OSPF, RIP, ISIS, and BGP. | |||||
| Supports Y.1731、CFM、EFM | |||||
| Easy-to-maintain characteristics | Supports multiple interfaces including GE, RSR232, USB, and miniUSB; supports in-band and out-of-band network management; and supports remote and on-site commissioning and maintenance. | ||||
| Supports M-BUTTON button function | |||||
| Support zero deployment | |||||
| Equipment Management | Supports WEB management, SNMP management, and ZGMP. | ||||
| Supports CLI, Telnet, and SSH | |||||
| Supports local and remote (Radius/Tacacs+) user login authentication and authorization. | |||||
| Supports NETCONF/YANG | |||||
| Supports sFlow | |||||
| S5860-28X-E | S5860-52X-E | S5860-28FX-E | |
| 交换容量 | 1.36T/13.6Tbps | 1.36T/13.6Tbps | 1.36T/13.6Tbps |
| 包转发率 | 462Mpps | 462Mpps | 462Mpps |
| 固定接口数 | 24端口GE RJ45+4端口10GE SFP+ | 48端口GE RJ45+4端口10GE SFP+ | 24端口GE SFP+4端口10GE SFP+ |
| 尺寸（H*W*D） | 43.6mm*442mm*420mm | ||
| 最大重量 | 6.2kg | 7kg | 6.6kg |
| AC 电源 | 100V~240V，50Hz~60Hz | ||
| DC电源 | -38V~-57V | ||
| 冗余电源 | 内置1+1冗余电源 | ||
| 散热方式 | 强制风冷 | ||
| 散热风道 | 左右进，后面出 | ||
| 最大功耗 | 57.2W | 75W | 65.2W |
| 最大散热量 | 195.1664BTU/h | 255.9BTU/h | 222.4624BTU/h |
| 工作环境 | 工作环境温度：-10℃~+50℃，湿度：10%~90% | ||
| MTBF/MTTR | > 400000 小时/ < 30 分钟 | ||
| L2功能 | 支持IEEE 802.1q VLAN，IEEE 802.1p，IEEE 802.3ad | ||
| 支持STP，RSTP，MSTP | |||
| 支持灵活QinQ，VLAN，PVLAN | |||
| 支持DHCP Snooping、DHCP Proxy、DHCP Server/CLient、DHCP Relay、DHCPv6 | |||
| 支持GVRP | |||
| 支持VxLAN | |||
| L3功能 | 支持IPv4/IPv6路由功能 | ||
| 支持静态路由、RIPv1/v2，OSPF， ISIS， BGP4、uRPF | |||
| 支持RIPng、OSPFv3、ISISv6、BGP4+ 、IPv6 VRF | |||
| 支持IPv6全球单播地址、 站点/链路本地地址、环回地址 | |||
| 支持IPv6 Ping6、Telnet6、TCPv6/UDPv6、DHCPv6 | |||
| 支持ND/NDP协议、SAVI功能、重定向功能 | |||
| 支持IPv6隧道 IPv4/IPv6双栈、6to4中继 | |||
| 支持策略路由 | |||
| MPLS | 支持MCE | ||
| 支持MPLS VPN | |||
| IPV6 | 支持IPv6 Ping、IPv6 Telnet、ND（Neighbor Discovery）、MLD Snooping、DHCPv6 snooping | ||
| 支持IPv6 ACL | |||
| 支持IPv4/IPv6双栈 | |||
| 支持6to4 tunnel、ISATAP tunnel | |||
| 组播 | 支持IGMP V1/V2/V3 | ||
| 支持IGMP侦听、过滤、代理和快速离开 | |||
| 支持可控组播、CAC频道访问控制 | |||
| 支持组播VLAN注册MVR | |||
| 支持基于VLAN/Group加入用户数量的限制 | |||
| 支持跨VLAN组播复制/组播VLAN | |||
| 支持PIM-SM、PIM-DM协议 | |||
| 支持二层组播IPv6，MLD Snooping、跨VLAN组播复制/组播VLAN IPv6 | |||
| 支持MSDP协议 | |||
| 支持三层组播路由IPv4/IPv6 | |||
| QoS | 支持基于端口/流的带宽管理 | ||
| 支持基于802.1p、IP DSCP等优先级标记、改写和映射 | |||
| 支持COS，IP DSCP，MPLS EXP 之间的映射 | |||
| 支持SP、WRR、SP+WRR的队列调度机制 | |||
| 支持WRED、尾丢弃等拥塞避免机制 | |||
| 支持基于二层ACL、扩展ACL（五元组）、混合ACL、自定义ACL、VLAN的ACL、双向ACL、ACL配置 | |||
| 支持普通端口、CPU端口重定向、流镜像 | |||
| 安全 | 支持用户分级管理和口令保护 | ||
| 支持CPU防攻击、CPU过载保护、DOS攻击防护 | |||
| 支持端口安全功能(隔离/绑定) | |||
| 支持LAND攻击保护、BLAT攻击保护、TCP攻击报文过滤 | |||
| 支持控制平面安全 | |||
| 支持动态ARP检测 | |||
| 支持生成树根保护、BPDU攻击保护 | |||
| 支持IP Source Guard | |||
| 支持uRPF单播逆向路由检查 | |||
| 支持RIP/OSPF/BGP MD5密文检查 | |||
| 接入认证 | 支持802.1X认证 EAP/PAP/CHAP | ||
| 支持本地认证 PAP/CHAP+VLAN+PORT+ 、VLAN+PORT+ MAC绑定认证 | |||
| 支持接入控制 基于MAC、基于PORT+MAC、基于VLAN+MAC、基于PORT + VLAN+MAC | |||
| 支持Radius认证 PAP/EAP/CHAP、RFC 2865 RADIUS、Radius Client | |||
| 支持TACACS+ 认证 | |||
| 支持Portal认证 V1/V2/V3 PAP/CHAP加密 | |||
| 可靠性 | 支持LACP、MC-LAG、VSE堆叠、ECMP等价路由 | ||
| 支持ZESS，ERPS、ZESR/ZESR+ | |||
| 支持VRRP、 VRRPE | |||
| 支持热插拔、PW FRR | |||
| 支持BFD for static route, OSPF, RIP, IS-IS, BGP、LDP | |||
| 支持IP FRR、GRfor静态路由、OSPF、RIP、ISIS、BGP | |||
| 支持Y.1731、CFM、EFM | |||
| 易维特性 | 支持GE、RSR232、USB、miniUSB多种接口，支持带内带外网管，支持远程、现场开通运维 | ||
| 支持易维按键（M-BUTTON）功能 | |||
| 支持零配置部署 | |||
| 设备管理 | 支持WEB管理、SNMP管理、ZGMP | ||
| 支持CLI，Telnet，SSH | |||
| 支持本地和远程（Radius/Tacacs+）的用户登录认证和授权 | |||
| 支持NETCONFIG/YANG | |||
| 支持sFlow | |||
| S5860-28X-E | S5860-52X-E | S5860-28FX-E | |
| Switching capacity | 1.36T/13.6Tbps | 1.36T/13.6Tbps | 1.36T/13.6Tbps |
| Packet forwarding rate | 462Mpps | 462Mpps | 462Mpps |
| Fixed number of ports | 24-port GE RJ45 + 4-port 10GE SFP+ | 48-port GE RJ45+ 4-port 10GE SFP+ | 24-port GE SFP+ 4-port 10GE SFP+ |
| Equipment size （H*W*D） |
43.6mm*442mm*420mm | ||
| Maximum weight | 6.2kg | 7kg | 6.6kg |
| AC power | 100V~240V，50Hz~60Hz | ||
| DC power supply | -38V~-57V | ||
| Power redundancy | Built-in 1+1 redundant power supply | ||
| Heat dissipation method | Forced air cooling | ||
| Cooling duct | Enter from the left and right, exit from the back. | ||
| Maximum power consumption | 57.2W | 75W | 65.2W |
| Maximum heat dissipation | 195.1664BTU/h | 255.9BTU/h | 222.4624BTU/h |
| working environment | Operating ambient temperature: -10℃ to +50℃, humidity: 10% to 90% | ||
| MTBF/MTTR | > 400000 小时/ < 30 分钟 | ||
| L2 function | Support IEEE 802.1q VLAN, IEEE 802.1p, IEEE 802.3ad | ||
| Supports STP, RSTP, and MSTP | |||
| Supports flexible QinQ, VLAN, and PVLAN. | |||
| Support DHCP Snooping, DHCP Proxy, DHCP Server/CLient, DHCP Relay, DHCPv6 | |||
| Support GVRP | |||
| Support VxLAN | |||
| L3 function | Supports IPv4/IPv6 routing functionality | ||
| Supports static routing, RIPv1/v2, OSPF, ISIS, BGP4, and uRPF. | |||
| Support RIPng, OSPFv3, ISISv6, BGP4+, IPv6 VRF | |||
| Support RIPng, OSPFv3, ISISv6, BGP4+, IPv6 VRF | |||
| Supports IPv6 global unicast addresses, site/link local addresses, and loopback addresses. | |||
| Supports ND/NDP protocol, SAVI function, and redirection function. | |||
| Supports IPv6 tunneling, IPv4/IPv6 dual-stack, and 6to4 trunking. | |||
| Support policy routing | |||
| MPLS | Support MCE | ||
| Supports MPLS VPN | |||
| IPV6 | Support IPv6 Ping, IPv6 Telnet, ND (Neighbor Discovery), MLD Snooping, DHCPv6 snooping | ||
| Supports IPv6 ACLs | |||
| Supports IPv4/IPv6 dual stack | |||
| Supports 6to4 tunnel and ISATAP tunnel | |||
| multicast | Supports IGMP V1/V2/V3 | ||
| Supports IGMP snooping, filtering, proxying, and fast exit. | |||
| Supports IGMP snooping, filtering, proxying, and fast exit. | |||
| Supports controllable multicast and CAC channel access control. | |||
| Supports multicast VLAN registration MVR | |||
| Supports cross-VLAN multicast replication/multicast VLANs | |||
| Supports PIM-SM and PIM-DM protocols | |||
| Supports Layer 2 multicast IPv6, MLD Snooping, cross-VLAN multicast replication/multicast VLAN IPv6 | |||
| Supports MSDP protocol | |||
| Supports Layer 3 multicast routing for IPv4/IPv6 | |||
| QoS | Supports port/stream-based bandwidth management | ||
| Supports priority marking, rewriting, and mapping based on 802.1p, IP DSCP, etc. | |||
| Supports mapping between COS, IP DSCP, and MPLS EXP. | |||
| Supports queue scheduling mechanisms such as SP, WRR, and SP+WRR. | |||
| Supports congestion avoidance mechanisms such as WRED and tail drop. | |||
| Supports Layer 2 ACLs, extended ACLs (5-tuples), hybrid ACLs, custom ACLs, VLAN ACLs, bidirectional ACLs, and ACL configuration. | |||
| Supports regular port redirection, CPU port redirection, and streaming mirroring. | |||
| Safety | Supports regular port redirection, CPU port redirection, and streaming mirroring. | ||
| Supports CPU attack prevention, CPU overload protection, and DOS attack protection. | |||
| Supports port security features (isolation/binding) | |||
| Supports LAND attack protection, BLAT attack protection, and TCP attack packet filtering. | |||
| Support control plane safety | |||
| Supports dynamic ARP detection | |||
| Supports spanning tree root protection and BPDU attack protection | |||
| Supports IP Source Guard | |||
| Supports uRPF unicast reverse route inspection | |||
| Supports RIP/OSPF/BGP MD5 encryption checking | |||
| Access authentication | Supports 802.1X authentication EAP/PAP/CHAP | ||
| Supports local authentication PAP/CHAP+VLAN+PORT+ and VLAN+PORT+MAC binding authentication. | |||
| Supports access control based on MAC, PORT+MAC, VLAN+MAC, and PORT + VLAN+MAC. | |||
| Supports RADIUS authentication PAP/EAP/CHAP, RFC 2865 RADIUS, and RADIUS Client. | |||
| Supports TACACS+ certification | |||
| Supports Portal authentication V1/V2/V3 and PAP/CHAP encryption. | |||
| reliability | Supports LACP, MC-LAG, VSE stacking, and ECMP equal-cost routing. | ||
| Support ZESS, ERPS, ZESR/ZESR+ | |||
| Supports VRRP and VRRPE | |||
| Supports hot-swapping and PW FRR | |||
| Support BFD for static route, OSPF, RIP, IS-IS, BGP, LDP | |||
| Supports IP FRR, GR for static routes, OSPF, RIP, ISIS, and BGP. | |||
| Supports Y.1731, CFM, and EFM. | |||
| Easy to use features | Supports multiple interfaces including GE, RSR232, USB, and miniUSB; supports in-band and out-of-band network management; and supports remote and on-site commissioning and maintenance. | ||
| Supports M-BUTTON button function | |||
| Supports zero-configuration deployment | |||
| Device management | Supports WEB management, SNMP management, and ZGMP. | ||
| Supports CLI, Telnet, and SSH | |||
| Supports local and remote (Radius/Tacacs+) user login authentication and authorization. | |||
| Supports NETCONFIG/YANG | |||
| Support sFlow | |||