全千兆智能交换机
产品描述
S5150-SE系列全千兆智能以太网交换机是为充分满足高带宽、高安全和高QoS保证的需求而推出的全千兆智能以太网交换机产品。S5150-SE系列产品可提供高密度千兆接口的无阻塞交换、支持完备的以太网交换技术、灵活的ACL控制、完善的安全功能和可靠性，以及全面的业务控制和用户管理能力，广泛适用于园区网千兆接入和汇聚场景。
各型号详见技术规格参数。
关键特性
- 强大的业务承载能力
- 增强的可靠性，全方位的安全性
- 强大的POE特性
- 易维护、易管理
- 绿色低碳 环保节能
技术规格
| 型号 | 描述 | model | describe |
| S5150-28-SE | 24×GE RJ45 + 4×GE SFP 包转发率：108Mpps/126Mpps 交换容量：432Gbps/4.32Tbps AC单电源 |
S5150-28-SE | 24×GE RJ45 + 4×GE SFP Packet forwarding rate: 108Mpps/126Mpps Switching capacity: 432Gbps/4.32Tbps Single AC power supply |
| S5150-52-SE | 48×GE RJ45 + 4×GE SFP 包转发率：132Mpp/166Mpps 交换容量：432Gbps/4.32Tbps AC单电源 |
S5150-52-SE | 48×GE RJ45 + 4×GE SFP Packet forwarding rate: 132Mpp/166Mpps Switching capacity: 432Gbps/4.32Tbps Single AC power supply |
| S5150-28P-SE | 24×GE POE+ + 4×GE SFP 包转发率：108Mpps/126Mpps 交换容量：432Gbps/4.32Tbps AC单电源 |
S5150-28P-SE | 24×GE PoE+ + 4×GE SFP Packet forwarding rate: 108Mpps/126Mpps Switching capacity: 432Gbps/4.32Tbps Single AC power supply |
| S5150-52P-SE | 48×GE POE+ + 4×GE SFP 包转发率：132Mpp/166Mpps 交换容量：432Gbps/4.32Tbps AC单电源 |
S5150-52P-SE | 48×GE PoE+ + 4×GE SFP Packet forwarding rate: 132Mpp/166Mpps Switching capacity: 432Gbps/4.32Tbps Single AC power supply |
| S5150-28-SE | S5150-52-SE | S5150-28P-SE | S5150-52P-SE | |
| 固定端口 | 24×GE RJ45 + 4×GE SFP | 48×GE RJ45 + 4×GE SFP | 24×GE POE+ + 4×GE SFP | 48×GE POE+ + 4×GE SFP |
| 交换容量 | 432Gbps/4.32Tbps | |||
| 包转发率 | 108Mpps/126Mpps | 132Mpp/166Mpps | 108Mpps/126Mpps | 132Mpp/166Mpps |
| 管理网口 | 1个RJ45 console口 | |||
| 尺寸(H×W×D) | 43.6×442×208 mm | 43.6×442×330 mm | 43.6×442×330 mm | 43.6×442×330 mm |
| 最大重量 | 2.25KG | 4.25KG | 2.95KG | 5.46KG |
| AC电源 | 100V~240V，50Hz~60Hz | |||
| POE供电 | 不支持 | 支持（单端口最大30W） | ||
| 最大功耗 | 38W | 58W | <430W | <430W |
| (PoE：370W) | (PoE：370W) | |||
| 散热方式 | 自然散热 | 风冷散热 | ||
| 工作温度 | -5℃~+45℃ | -5℃~+50℃ | ||
| 工作海拔 | < 5000 米 | |||
| L2特性 | 支持IEEE 802.1p (CoS)、 IEEE 802.1q (VLAN)、 IEEE 802.3x | |||
| 支持IEEE 802.1d (STP)/ 802.1w (RSTP)/ 802.1s (MSTP)/EVST | ||||
| 支持基于端口的 VLAN、基于MAC的 VLAN、Voice VLAN | ||||
| 支持QinQ、灵活 QinQ | ||||
| 支持PVLAN | ||||
| 支持VLAN翻译 | ||||
| 支持端口镜像、流镜像 | ||||
| 支持GVRP（GARP VLAN Registration Protocol）协议 | ||||
| 支持MAC地址绑定 | ||||
| 支持MAC 过滤 和动态MAC学习 | ||||
| 支持MAC OAM（MAC地址学习使能开关、MAC地址分类显示、MAC地址全表显示） | ||||
| L3特性 | 支持IPv4静态路由、策略路由、RIP、OSPF | |||
| 支持IPv6静态路由、策略路由、RIPng、OSPFv3 | ||||
| 支持ARP、Ping、Tracert、Telnet | ||||
| 支持ND、IPv6 Ping、IPv6 Tracert、IPv6 Telnet | ||||
| 组播 | 支持IGMPv1/v2/v3 snooping | |||
| 支持CAC (Channel Access Control) | ||||
| 支持MVR Features | ||||
| 支持MLD Snooping | ||||
| 支持PIM Snooping | ||||
| 支持IGMPv1/v2/v3 | ||||
| 支持PIM DM、PIM SM、PIM SSM | ||||
| 支持MSDP | ||||
| 支持静态组播 | ||||
| QoS | 支持L2（Layer 2）~L4（Layer 4）包过滤功能，提供基于源MAC地址、目的MAC地址、源IP地址、目的IP地址、TCP/UDP协议源/目的端口号、协议、VLAN的流分类功能 | |||
| 每端口支持8个硬件队列 | ||||
| 支持SP、WRR、SP+WRR队列调度机制 | ||||
| 支持尾丢弃等拥塞避免机制 | ||||
| 支持流量监管和整形 | ||||
| ACL | 支持标准ACL、基于VLAN 的ACL、Link ACL、扩展ACL、混合 ACL、IPv6 ACL | |||
| 支持基于时间段的 ACL | ||||
| 支持出、入双方向ACL | ||||
| PoE | 支持PoE (IEEE 802.3af) | |||
| 支持PoE+ (IEEE 802.3at) | ||||
| (仅PX机型支持) | ||||
| 设备管理 | 支持CLI、Telnet、SSHv2、本地和远程 (RADIUS/TACACS+) 用户认证 | |||
| 支持SNMPv1/v2/v3 | ||||
| 支持RMON | ||||
| 支持NTP | ||||
| 支持FTP/TFTP/SFTP | ||||
| 支持Syslog、Sflow | ||||
| 易维特性 | 支持零部署 | |||
| 支持配置文件自动下载 | ||||
| 支持热补丁 | ||||
| 支持线路诊断分析和测试 | ||||
| 支持端口环回检测 | ||||
| S5150-28-SE | S5150-52-SE | S5150-28P-SE | S5150-52P-SE | |
| Fixed port | 24×GE RJ45 + 4×GE SFP | 48×GE RJ45 + 4×GE SFP | 24×GE POE+ + 4×GE SFP | 48×GE POE+ + 4×GE SFP |
| Switching capacity | 432Gbps/4.32Tbps | |||
| Packet forwarding rate | 108Mpps/126Mpps | 132Mpp/166Mpps | 108Mpps/126Mpps | 132Mpp/166Mpps |
| Management port | 1 RJ45 console port | |||
| Dimensions (H×W×D) | 43.6×442×208 mm | 43.6×442×330 mm | 43.6×442×330 mm | 43.6×442×330 mm |
| Maximum weight | 2.25KG | 4.25KG | 2.95KG | 5.46KG |
| AC power | 100V~240V，50Hz~60Hz | |||
| PoE power supply | Not supported | Supports up to 30W per port. | ||
| Maximum power consumption | 38W | 58W | <430W | <430W |
| (PoE：370W) | (PoE：370W) | |||
| Heat dissipation method | Natural heat dissipation | air cooling | ||
| Operating temperature | -5℃~+45℃ | -5℃~+50℃ | ||
| Working altitude | < 5000 meters | |||
| L2 characteristics | Supports IEEE 802.1p (CoS), IEEE 802.1q (VLAN), and IEEE 802.3x. | |||
| Supports IEEE 802.1d (STP) / 802.1w (RSTP) / 802.1s (MSTP) / EVST | ||||
| Supports port-based VLANs, MAC-based VLANs, and Voice VLANs. | ||||
| Supports QinQ, flexible QinQ | ||||
| Supports PVLAN | ||||
| Supports VLAN translation | ||||
| Supports port mirroring and stream mirroring. | ||||
| Supports GVRP (GARP VLAN Registration Protocol) | ||||
| Supports MAC address binding | ||||
| Supports MAC filtering and dynamic MAC learning. | ||||
| Supports MAC OAM (MAC address learning enable switch, MAC address category display, and full MAC address table display). | ||||
| L3 characteristics | Supports IPv4 static routing, policy routing, RIP, and OSPF. | |||
| Supports IPv6 static routing, policy routing, RIPng, and OSPFv3. | ||||
| Supports ARP, Ping, Tracert, and Telnet. | ||||
| 支持ND、IPv6 Ping、IPv6 Tracert、IPv6 Telnet | ||||
| multicast | Supports IGMPv1/v2/v3 snooping | |||
| Supports CAC (Channel Access Control) | ||||
| Support MVR Features | ||||
| Supports MLD Snooping | ||||
| Support PIM Snooping | ||||
| Supports IGMPv1/v2/v3 snooping | ||||
| Supports PIM DM, PIM SM, and PIM SSM | ||||
| MSDP supported | ||||
| Support static multicast | ||||
| QoS | Supports L2 (Layer 2) to L4 (Layer 4) packet filtering functions, providing flow classification functions based on source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP source/destination port number, protocol, and VLAN. | |||
| Each port supports 8 hardware queues. | ||||
| Supports SP, WRR, and SP+WRR queue scheduling mechanisms. | ||||
| Supports congestion avoidance mechanisms such as tail drop. | ||||
| Supports traffic monitoring and reshaping | ||||
| ACL | Supports standard ACLs, VLAN-based ACLs, Link ACLs, extended ACLs, hybrid ACLs, and IPv6 ACLs. | |||
| Supports time-based ACLs | ||||
| Supports both inbound and outbound ACLs | ||||
| PoE | PoE (IEEE 802.3af) is supported. | |||
| PoE+ (IEEE 802.3at) is supported. | ||||
| (PX models only) | ||||
| Equipment Management | Supports CLI, Telnet, SSHv2, local and remote (RADIUS/TACACS+) user authentication. | |||
| Supports SNMPv1/v2/v3 | ||||
| Support RMON | ||||
| Support NTP | ||||
| Supports FTP/TFTP/SFTP | ||||
| Supports Syslog and Sflow | ||||
| Easy-to-maintain characteristics | Support zero deployment | |||
| Supports automatic configuration file download | ||||
| Supports hot patching | ||||
| Supports line diagnostics, analysis, and testing. | ||||
| Supports port loopback detection | ||||